About

Farmshop Manufacturing

We service most Horning products including Horning 3 row cornheads ,Horning  2 row cornheads ,Horning  rollermills , pulltype kernal processors and replacement rolls to fit most makes and models for New Holland , John Deere , Krone , Gehl , Claas and Dion  .

Sunday: Closed
Monday: 9:00 am-5:00 pm
Tuesday: 9:00 am-5:00 pm
Wednesday: 9:00 am-5:00 pm
Thursday: 9:00 am-5:00pm
Friday: 9:00 am-5:00 pm
Saturday: Closed

Areas We Serve

Owen, Wisconsin - Withee, Wisconsin - Stanley, Wisconsin - Unity, Wisconsin - Thorp, Wisconsin - Loyal, Wisconsin - Colby, Wisconsin - Curtiss, Wisconsin - Boyd, Wisconsin

Products we carry

As an authorized dealer, we carry the full line up of the Horning Mfg. family of quality corn harvesting products including 2 row and 3 row rotary row independent cornheads, complete kernel processor kits for pull-type machines and replacement rolls to fit pull-type processors such as New Holland, John Deere, Gehl and Dion. Each Horning line is engineered for its specific use to bring you best possible value. Replacement kernel processor rolls from are available in industry leading Fibertech or high-capacity sawtooth designs. They will fit many brands including Krone, New Holland , John Deere and Claas. Horning’s stationary electric rollermill is available in three models for small to mid sized operations, grinding approximately 40 lbs. of corn per minute – that’s up to 800 bushels an hour! It is available with several tooth configurations - for course corn cracking to small grains and can be purchased with a bagger for high-moisture corn. Ready to get cracking? Contact us now and we’ll help you match the correct product for your application.

Slice through a variety of crops and keep your harvest moving with our tough, reliable corn head. Configure it to harvest your 15” rows, twin rows, 38” wide rows, 20” rows and 30” rows to name a few. This 3 row corn head cuts an 88” swath no matter the direction or spacing. Comes with the mount of your choice to fit many brands of pull type forage harvesters including New Holland, John Deere, Gehl and Dion.

Enjoy a no-nonsense harvest! Outfit your pull type forage harvester with a dependable Horning rotary corn head. 15” rows, twin rows, 38” wide rows, 20” rows and 30” rows to name a few. This 2 row corn head cuts a 58” swath no matter the direction or spacing. It will be delivered with the mount kit of your choice to fit select models of New Holland, John Deere, Gehl and Dion harvesters.

Horning’s patented design leading the industry in kernel processsing effectiveness.

Superior crop mat penetration at any chop length.

Most intense kernel processing design on the market.

Utilizes hi-capacity sawtooth profile for standard forage processing applications.

Process kernels in multiple dimension, tearing while shearing sideways with the groove pattern.

Less strain on your machine. End strain comes from a single direction groove pattern designs in competing brands.

Runs in speed differentials ranging from 30-50%.

Crop mat feed-through is efficient, allowing maximum performance at a minimum of wear

The sawtooth design was an enhancement to the original straight-tooth design. It adds a tearing action instead of smashing.

Superior crop mat penetration compared to competing sawtooth options.

Power efficient.

Can be used on older, lower-power machines.

Process kernels in one dimension.

Less stalk processing than grooved designs.

Less strain on your machine.

Runs in speed differentials ranging from 20-40%

Straight tooth rolls were the original KP roll design in the industry using crimping action to process kernels by crushing.

This tooth configuration is primarily used in the milling industry.

This tooth in a fine tooth-count is used in conjunction with the Fibertech Chevron pattern for small-grain, whole-crop processing applications.

Tooth configurations for nearly any application and size of milling need.

This corn cracker gives you maximum efficiency in space and power. Horning roller mills are available in two sizes with multiple motor size options. Enjoy reliable, easy-adjustable, and customizable roll configurations fine-tuned to your application. Get more out of your roller mill with Horning replacement mill rolls.

At the head of the pack in processing technology, Horning is passionate about kernel processing scores and profitability for all players in the dairy food chain. Our kernel processor package embodies that passion. Built for optimization, durability, and ease of use, our kernel processors are money makers. Quality corn silage is our goal. We offer kits for pull type forage harvesters to fit John Deere, New Holland & more.

Contact Us

Ready to reap a harvest of success? Simply fill out the form below to contact your local Horning Dealer, Farmshop Manufacturing, to learn more about Horning’s Innovative Silage Processing Equipment. Need immediate assistance? Call Farmshop Manufacturing now at (715) 229-2206.
Ready to reap a harvest of success? Simply fill out the form below to contact your local Horning Dealer, <h2>Contact Us</h2> <div class="gray-back">Ready to reap a harvest of success? Simply fill out the form below to contact your local Horning Dealer, West Hills Tractor, Inc., to learn more about Horning’s Innovative Silage Processing Equipment. Need immediate assistance? Call&nbsp;West Hills Tractor, Inc. now at <a href="tel:1-423-753-4621">(423) 753-4621</a>.</div> , to learn more about Horning’s Innovative Silage Processing Equipment. Need immediate assistance? Call <h2>Contact Us</h2> <div class="gray-back">Ready to reap a harvest of success? Simply fill out the form below to contact your local Horning Dealer, West Hills Tractor, Inc., to learn more about Horning’s Innovative Silage Processing Equipment. Need immediate assistance? Call&nbsp;West Hills Tractor, Inc. now at <a href="tel:1-423-753-4621">(423) 753-4621</a>.</div> now at (423) 753-4621.

 

Dealer Info